Sheet Numbering Standards

Topic

The following list is the common sheet numbers utilized in a typical project. Though this list is not complete it is to adhered to as closely as possible. Many of the items listed will not be utilized and should be deleted from the final sheet list. If an engineer or designer from outside the company uses a different standard, then their standard is to supersede Keyes' standard.

Sheet List

TITLE

T0.## TITLE SHEET

CIVIL / EROSION CONTROL *

C0.## CIVIL INFORMATION, NOTES, ETC.

C1.## SITE PLANS, TOPOGRAPHICAL

C2.## SITE DETAILS, EROSION CONTROL

SITE UTILITIES *

U1.## SITE PLANS

U2.## UTILITY DETAILS

LANDSCAPING *

LS1.## LANDSCAPING PLANS

LS2.## LANDSCAPING DETAILS

DEMOLITION

D1.## DEMOLITION PLANS

D2.## DEMOLITION ELEVATIONS

D3.## DEMOLITION DETAILS

FOUNDATION

F1.## FOUNDATION PLANS

F2.## FOUNDATION DETAILS

STRUCTURAL

S1.## STRUCTURAL PLANS

S2.## STRUCTURAL DETAILS

ARCHITECTURAL

A1.## FLOOR, DIMENSION, ENLARGED, AND SPECIAL (REFLECTED CEILING, ROOF, SEATING…) PLANS

A2.## EXTERIOR AND ENLARGED ELEVATIONS

A3.## ADA NOTES, CALLOUTS, DIAGRAMS

A4.## ROOM, DOOR, AND WINDOW SCHEDULES

A5.## BUILDING SECTIONS, WALL SECTIONS, WALL DETAILS

A6.## DOOR AND WINDOW DETAILS

A7.## CASEWORK, MILLWORK, AND INTERIOR BUILDING ELEVATIONS / DETAILS

A8.## STAIR / ELEVATOR DETAILS

EQUIPMENT

EQ1.## EQUIPMENT PLANS

EQ2.## EQUIPMENT ELEVATIONS

EQ3.## EQUIPMENT DETAILS / SCHEDULES

MECHANICAL *

M1.## MECHANICAL PLANS

M2.## MECHANICAL ELEVATIONS

M3.## MECHANICAL DETAILS / SCHEDULES

PLUMBING *

P1.## PLUMBING PLANS

P2.## PLUMBING ELEVATIONS / RISERS

P3.## PLUMBING DETAILS / SCHEDULES

ELECTRICAL *

E1.## ELECTRICAL AND LIGHTING PLANS

E2.## ELECTRICAL ELEVATIONS, RISERS

E3.## ELECTRICAL DETAILS, PANELS

SPECIFICATIONS

SP1.## SPECIFICATION SHEETS

SP1.## SPECIFICATION SHEETS

LEGEND: ## = SHEET NUMBERING RANGING FROM 00 - 99

* This section is typical of Keyes Architects, if we have outsourced the work to an Engineer or Designer, then use their numbering standards.